Easier to use products through auto-settings and better visibility.
Improve productivity with technologies that enhance efficiency and save you money.
Optimize your operation through advanced welding processes, training and weld data monitoring.
Click image to zoom.
Double click image to zoom.
Click here to open in a new window.
The ArcReach® 16 wire feeder base model is equipped with a simple interface that allows operators to adjust parameters at the point of use with no control cords. Switch between welding and gouging with a push of a button with no need to swap leads or disconnect. It can also handle large-diameter wire (3/32).
The ArcReach® 16 wire feeder preassembled shop cart model provides easy shop mobility with low clearance. Handle doubles as a cable holder.
The field model has integrated field rollers, spool cover, hanging bail, and cable holder. Designed to go over pan decking and surfaces.
The ArcReach SuitCase 12 Heavy Duty model is specifically designed for applications using 3/32-inch wire. Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!
Portable and lightweight, the ArcReach stick/TIG remote paired with a Dimension, XMT, or compatible engine-driven ArcReach power source allows you to change weld setting at your work area,
saving a trip to the power supply. No extra control cable to purchase, maintain, string
or unstring—saving time and money.
Includes flowmeter regulator with 10-foot (3 m) gas hose, 10-foot (3 m) 4/0 feeder weld cable with lug connector on one end and a lug on the other, 15-foot (4.6 m) work cable with lug connector on one end and 600-amp C-clamp on the other.
Simple and cost-effective two drive roll wire feeder for industrial manufacturing and fabricating.
Portable air-cooled induction heating system for preheat and bake-out applications up to 600 degrees Fahrenheit (315° C). Includes heater and extension cable - requires selection of either air-cooled cable(s) and/or air-cooled quick wraps as heating tools.
Portable air-cooled induction heating system for preheat and bake-out applications up to 600 degrees Fahrenheit (315° C). Package includes heater, extension cable and two air-cooled quick wraps for heating tools.
Portable air-cooled induction heating system for preheat and bake-out applications up to 600 degrees Fahrenheit (315° C)
A reality-based recruiting, screening and training solution.
Air-cooled cables or quick wraps connect to the side of the ArcReach Heater. Up to six thermocouple sensors connect to the yellow panel and provide temperature feedback from the piece that is being heated.
Works on pipe with outside diameter of 10-1.5 inches and up to a 600° F (315°C). Most joints will require two quick wraps to be used simultaneously -- one on each side of the joint. Add preheat insulation based on temperature requirements.
Preheat Insulation with hook and loop straps for retaining induction heating cables in various configurations. Ideal for heating repetitive parts or hanging with sewn-in grommets.
Ideal for securing induction cables.
To activate your FREE subscription today, simply select which newsletter(s) you would like to receive and complete the form below.
Already signed up? Manage your subscription(s) by signing into your account. Or if you don't have a Miller account, create one today. Sign in / Create Account.
*Please select at least one e-Newsletter.
You can manage your subscription(s) by signing into your account. Or if you don't have a Miller account, create one today. Sign in / Create Account.