For right side of dual-wire models
Portable feeder, with standard remote voltage control, for applications where the feeder is within 100 feet of the power source and control cords are acceptable.
Used for suspending feeder over work area.
For 20,70 and Intellx series single-wire models and left side of dual-wire models.
For use with 8-, 12- or 16-foot Swingarcs.
Each base accommodates a power source, Swingarc, feeder system, water coolant system, and gas cylinder.
Gas Flow Meter Kit for the FieldPro Feeder and FieldPro Smart Feeder.
Dual-function, back-lit LCD digital meter
with selector switch. The digital meter
allows the wire feed speed to be preset in
inches per minute or meters per minute.
The voltage function, if used with a
current Miller-manufactured, electronically
controlled, constant-voltage power source,
allows the arc voltage to be preset and
monitored on the digital display. When
used with voltage control #194 211.
Pipe post is required to mount Swingarc
to Swingpak base or floor.
Permits 14 lb. (6 kg) coils of wire to be mounted on 2 in (51mm) O.D. feeder spindles.
For 60 lb (27 kg) coil. Helps protect the welding wire from dust and other contaminants. Reel Cover cannot be installed if the wire drive assembly is in a rotated position.
Pipe post is required to mount Swingarc
to Swingpak base or floor.
Designed to put spool hub assembly at 36 inches from base for easier wire spool installation.